No products in the cart.
1″ Beam Clamp 75lb Load, 1/4-20 Thread
This steel plated beam clamp provides sturdy support for loop cable hangers on I-beams and steel supports.
*Screws, Rods and Nuts Sold Separately
Hex Nut, 1/4-20, Quadrex Zinc (25 pack)
These hex nuts are zinc plated and have a 1/4-20 thread. They are used along with 1/4-20 screws and rods (part numbers CC-SC01-075-25, CC-SC01-125-25 and CC-TR01-18).
J-Hook – 2 inch Plastic (Used with Beam Clamp)
These J-Hooks are convenient for running communications cable and can be used with beam clamps. They support up to 90 Cat5e cables with the center radius of the bundle spread over the 2 inch opening. Attach them easily to various supports, beam clamps and struts. They are also stackable – in parallel or perpendicular orientation for vertical support of multiple tiers of cable and maintain the integrity of high performance data cable.
J-Hook – 2 inch Steel (Used with Beam Clamp)
These J-Hooks are convenient for running communications cable and can be used with beam clamps. They support up to 90 Cat5e cables with the center radius of the bundle spread over the 2 inch opening. Attach them easily to various supports, beam clamps and struts. They are also stackable – in parallel or perpendicular orientation for vertical support of multiple tiers of cable and maintain the integrity of high performance data cable.
J-Hook – 2 inch Steel (Used with Threaded Rod and Beam Clamp)
These J-Hooks are convenient for running communications cable and can be used with threaded rods and beam clamps. They support up to 90 Cat5e cables with the center radius of the bundle spread over the 2 inch opening. Attach them easily to various supports, beam clamps and struts. They are also stackable – in parallel or perpendicular orientation for vertical support of multiple tiers of cable and maintain the integrity of high performance data cable.
Loop Cable Hanger 2 inch, Plenum Rated
This loop hanger provides sturdy and reliable support for a variety of networking cables such as CAT5e, CAT6, CAT6A and fiber optic cabling. It is flexible, can rotate to any direction and holds a 2 inch diameter bundle cabling without damaging the cable. It is also made of plenum rated material so that it can be used in plenum spaces above ceilings and below floors.
*Beam Clamp, Screws, Rods and Nuts All Sold Separately
Loop Cable Hanger 2.5 inch, Plenum Rated
This loop hanger provides sturdy and reliable support for a variety of networking cables such as CAT5e, CAT6, CAT6A and fiber optic cabling. It is flexible, can rotate to any direction and holds a 2.5 inch diameter bundle cabling without damaging the cable. It is also made of plenum rated material so that it can be used in plenum spaces above ceilings and below floors.
*Beam Clamp, Screws, Rods and Nuts All Sold Separately
Loop Cable Hanger 5 inch, Plenum Rated
This loop hanger provides sturdy and reliable support for a variety of networking cables such as CAT5e, CAT6, CAT6A and fiber optic cabling. It is flexible, can rotate to any direction and holds a 5 inch diameter bundle cabling without damaging the cable. It is also made of plenum rated material so that it can be used in plenum spaces above ceilings and below floors.
*Beam Clamp, Screws, Rods and Nuts All Sold Separately
Screw, 1/4-20, 1.25 inch Length, Pan-Head, Quadrex Zinc (25 pack)
These screws have a 1/4-20 thread and are 1.25 inches in length. They are compatible with our CC-BC0250 beam clamp and CC-HN01-075-25 nuts and are typically used to secure our loop cable hangers to our beam clamps in a perpendicular fashion. They are zinc plated and are sold in packs of 25.
*Nuts Sold Separately
Screw, 1/4-20, 3/4 inch Length, Pan-Head, Quadrex Zinc (25 pack)
These screws have a 1/4-20 thread and are 3/4 inches in length. They are compatible with our CC-BC0250 beam clamp and CC-HN01-075-25 nuts and are typically used to secure our loop cable hangers to our beam clamps in a parallel fashion. They are zinc plated and are sold in packs of 25.
*Nuts Sold Separately
Standard Hanger for LMR-400, LMR-500 and LMR-600 Cable
This cable hanger provides sturdy and reliable support for LMR-400, LMR-500 and LMR-600 cables.
