No products in the cart.
.MULTl-CHANNEL 30 X 12.5 X 12.5 X H:11.2MM X 2M WHITE
PROFESSIONALLY ORGANIZE & ROUTE CABLES: Cable management raceway protect up to 12 cables from damage/debris w/closed design, route them in office/server room install using screw holes/double sided tape
.MULTl-CHANNEL 40 X 11X 11.5 X 11.5 X H:10.3MM X 2M WHITE
Cable management raceway protect up to 12 cables from damage/debris w/closed design, route them in office/server room install using screw holes/double sided tape
.MULTl-CHANNEL 50.8 X 14.8 X 10 X 20.3 X H:20.3MM X 2M WHITE
Cable management raceway protects cables from damage & neatly routes them in your office or server room; Features 3 channels to easily organize multiple cables
.ROUND TYPE W: 120 X W1:70 X H:25 X H1:21MM X 2M GREY
Wiring Duct with adhesive tape without mounting hole round type, grey color
W:120 X W1:70 X H:25 X H1:21MM X 2M GREY
.ROUND TYPE W:50 X W1:20 X H:11X H1:8MM X 2M GREY
This 6 ft. 2-inch floor cable duct features a rounded top with a snap lid that provides easy access to cables while maintaining a neat, clutter free appearance.
The floor cable duct provides a safe way to run cable across a floor or hallway, reducing tripping hazards and cable tangles.
1 Pair Banana Clip Wall Plate Kit – White
This wall plate kit consists of a wall plate, and 1-pair of Banana Clip female to female inserts. It is compatible with standard North American electrical openings, data clips or surface mount boxes.
1 Pair Banana Clip Wall Plate Kit Decora – White
This wall plate kit consists of a Decora wall plate, and 1-pair of Banana Clip female to female inserts. It is compatible with standard North American electrical openings, data clips or surface mount boxes.
1 Port RJ11 Telephone Surface Mount Box – White
This RJ11 surface mount box has one RJ11 female port and four screw terminals. It is used to wire a RJ11 (6P4C) telephone Jack.
1-15P to C7 Power Adapter
This adapter consists of a 1-15P plug on one end and a C7 receptacle on the other. It is primarily used to adapt or convert an existing power cable.
1-15P to C7 Right Angle Power Adapter
This right angle adapter consists of a 1-15P plug on one end and a C7 receptacle on the other. It is primarily used to adapt or convert an existing power cable.
1-Channel 10/100/1000M PoE Extender – 30W – IEEE 802.3af/at
This PoE extender is Gigabit PoE extender with one PoE input and one PoE output. it can be used inline with CAT5E and CAT6 cable runs to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN access points and network cameras. It does not require any additional power supply which simplifies installation. the Ethernet ports configured automatically for link speed, duplex and crossover and provides the full rate network throughout the whole extended distance.
1-Channel 10/100/1000M PoE Extender – 30W – IEEE 802.3af/at
This PoE extender is Gigabit PoE extender with one PoE input and one PoE output. it can be used inline with CAT5E and CAT6 cable runs to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN access points and network cameras. It does not require any additional power supply which simplifies installation. the Ethernet ports configured automatically for link speed, duplex and crossover and provides the full rate network throughout the whole extended distance.
1-Channel 10/100/1000M PoE Extender – 30W – IEEE 802.3af/at
This PoE extender is Gigabit PoE extender with one PoE input and one PoE output. it can be used inline with CAT5E and CAT6 cable runs to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN access points and network cameras. It does not require any additional power supply which simplifies installation. the Ethernet ports configured automatically for link speed, duplex and crossover and provides the full rate network throughout the whole extended distance.
1-Channel 10/100/1000M PoE Extender – 30W – IEEE 802.3af/at – Outdoor IP68 Rated
This outdoor waterproof PoE extender is Gigabit PoE extender with one PoE input and one PoE output. it can be used inline with CAT5E and CAT6 cable runs to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN access points and network cameras. It does not require any additional power supply which simplifies installation. the Ethernet ports configured automatically for link speed, duplex and crossover and provides the full rate network throughout the whole extended distance.
1-Channel 10/100/1000M PoE Extender – 30W – IEEE 802.3af/at – Outdoor IP68 Rated
This outdoor waterproof PoE extender is Gigabit PoE extender with one PoE input and one PoE output. it can be used inline with CAT5E and CAT6 cable runs to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN access points and network cameras. It does not require any additional power supply which simplifies installation. the Ethernet ports configured automatically for link speed, duplex and crossover and provides the full rate network throughout the whole extended distance.
1-Channel 10/100/1000M PoE Extender – 30W – IEEE 802.3af/at – Outdoor IP68 Rated
This outdoor waterproof PoE extender is Gigabit PoE extender with one PoE input and one PoE output. it can be used inline with CAT5E and CAT6 cable runs to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN access points and network cameras. It does not require any additional power supply which simplifies installation. the Ethernet ports configured automatically for link speed, duplex and crossover and provides the full rate network throughout the whole extended distance.
1-Channel 10/100/1000M PoE Injector – 30W – IEEE 802.3af/at
This compact 30 watts PoE injector is a single port passive PoE injector. It can convert standard 100 ~ 240V/AC power into low voltage DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories and IP security cameras. No external power supply is required providing a compact, cost effective and reliable power solution over existing Ethernet infrastructure.
1-Channel 10/100/1000M PoE Injector – 30W – IEEE 802.3af/at
This compact 30 watts PoE injector is a single port passive PoE injector. It can convert standard 100 ~ 240V/AC power into low voltage DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories and IP security cameras. No external power supply is required providing a compact, cost effective and reliable power solution over existing Ethernet infrastructure.
1-Channel 10/100/1000M PoE Injector – 30W – IEEE 802.3af/at
This compact 30 watts PoE injector is a single port passive PoE injector. It can convert standard 100 ~ 240V/AC power into low voltage DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories and IP security cameras. No external power supply is required providing a compact, cost effective and reliable power solution over existing Ethernet infrastructure.
1-Channel 10/100/1000M PoE Injector – 60W – IEEE 802.3af/at
This compact 60 watts PoE injector is a single port passive PoE injector. It can convert standard 100 ~ 240V/AC power into low voltage DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories and IP security cameras. No external power supply is required providing a compact, cost effective and reliable power solution over existing Ethernet infrastructure.
