No products in the cart.
RJ45 Cat6 Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat6 ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 Cat6 Plug with Snagless Tab for Stranded Round Cable (8P 8C)
This modular RJ45 Cat6 connector with snagless tab is a 8 position, 8 conductor plug. It’s typically terminated on 8 conductor stranded round cable. They are available as 50 or 100 packs.
RJ45 CAT6 Snagless Boot (No Tab) – Clear – 50 Pack
The RJ45 boots are designed to fit most CAT6 cables. This boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The boots are available as 50 or 100 packs.
RJ45 Cat6 UTP Gel Filled Outdoor UV Direct Burial Cable
This Cat6 UTP gel filled outdoor UV direct burial ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used outdoors either above or below ground as premise wiring to connect network devices.
These cables are made to order. Most orders ship out same day or next day depending on the quantity.
RJ45 Cat6 UTP Outdoor UV Direct Burial Cable – Black
This Cat6 UTP outdoor UV direct burial ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used outdoors either above or below ground as premise wiring to connect network devices.
RJ45 Cat6 UTP Ultra-Thin Patch Cable – CMR Riser Rated
This Cat6 Ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for Ethernet network connections such as patch panels, switches, computers and routers. It’s ultra-thin cable design works perfectly in high density server room applications. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6/Cat6a Locking 3-pcs Plug with Boot for Solid or Stranded Round Cable (8P 8C)
This locking RJ45 Cat6/Cat6a plug is an 8 position, 8 conductor plug. It’s typically terminated on 4 pair stranded or solid round cable. The plug has a push-in locking tab which helps prevent accidental disconnects for critical networking applications. Each plug comes with a key which is required to easily unlock the connector. They are available as 50 or 100 packs.
RJ45 CAT6a Boot for Slim Cable – Clear – 50 Pack
The RJ45 boots are designed to fit most Cat6a slim cables. This boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 or 100 packs.
RJ45 Cat6A Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat6a ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 Cat6a Plug w/ Insert (Solid or Stranded) (8P 8C) – 50 Pack
This modular RJ45 Cat6a connector with insert is a 8 position, 8 conductor plug. It’s typically terminated on 8 conductor stranded round cable.
RJ45 Cat6a Shielded 3-pcs Plug (Solid or Stranded) (8P 8C) – 50 pack
This modular RJ45 Cat6a shielded connector is an 8 position, 8 conductor plug. The plug is typically used to terminate shielded Cat6a solid or stranded cable.
RJ45 Cat6a Shielded Plug with Insert (Solid or Stranded) (8P 8C) – 50 Pack
This modular RJ45 Cat6a connector is a 8 position, 8 conductor plug. It’s typically terminated on 8 conductor solid or stranded round cable. They are available as 50 or 100 packs.
RJ45 Cat6a SSTP 10GB Molded Patch Cable- CMR Riser Rated
This Cat6a shielded ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The shielding helps protect against electro-magenetic (EMI) and radio frequency interference (RFI). The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6a UTP 10GB Molded Patch Cable – CMR Riser Rated
This Cat6a ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6a UTP Outdoor UV Direct Burial Cable – Black
This Cat6 UTP gel filled outdoor UV direct burial ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used outdoors either above or below ground as premise wiring to connect network devices.
These cables are made to order. Most orders ship out same day or next day depending on the quantity.
RJ45 Cat6a/Cat7 Boot for STP Plugs – 100 pack
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 100 packs.
RJ45 Cat6a/Cat7 Boot for STP Plugs with External SR 8.0mm – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Cat7 Shielded Plug with Lacing Bar Insert and External Strain Relief (Solid or Stranded) (8P 8C)
This modular RJ45 Cat7 connector is a 8 position, 8 conductor plug. It’s typically terminated on 4 pair solid or stranded round cable and has an external crimp strain relief. Designed to meet CAT7 performance standards, it can also be used on CAT6A cable. They are available as 50 or 100 packs.
RJ45 Female Port Dust Cap – Black (100 pack)
This dust cap fits RJ45 female ports. It is typically used to help keep contaminants out of RJ45 ports.
RJ45 Male Plug Dust Cap – Black (100 pack)
This dust cap fits RJ45 male plug. It is typically used to help keep contaminants off of RJ45 plugs.
