Banana Clip Female to Female Bulkhead (Pair, Black/Red), Gold Plated
These banana clip wall plate adapters are sold in pairs and consist of a female banana clip on both ends as well as having a mounting screw down hole for bare speaker wire. They can be panel mounted in a B= inch hole and are typically used to join banana clip male cables or secure bare speaker wire.
Banana Clip Female/Female Keystone wall plate Insert (Pair, Black/Red), Gold Plated – Black
This keystone adapter consists of a Banana Clip female on one end and a Banana Clip female on the other end. It is typically used to snap into a standard keystone opening and connect a Banana cable coming from within the wall to a Banana cable going to a source. Sold in pairs and color coded.
Banana Clip Female/Female Keystone wall plate Insert (Pair, Black/Red), Gold Plated – White
This keystone adapter consists of a Banana Clip female on one end and a Banana Clip female on the other end. It is typically used to snap into a standard keystone opening and connect a Banana cable coming from within the wall to a Banana cable going to a source. Sold in pairs and color coded.
Battery 1.5V size 303/357 Silver Oxide (1 Pack)
This silver oxide 1.5 volt battery is size 303/357. It is typically used in medical devices, watches and calculators and is sold in a single pack.
BIX 12-port RJ11 6P4C Jack to BIX Strip (A0330863 – 36B)
This bix block has space for 12 runs of 2 pair cable per side. It is used to terminate twelve 2 pair cables to twelve RJ11 female ports.
BIX 25 Pair Block (QCBIX1A)
This bix block has space for 5 runs of 4 pair cable per side. It is used to terminate phone lines.
BIX 25 Pair Block (QCBIX1A4)
This bix block has space for 6 runs of 4 pair cable per side. It is used to terminate phone lines.
BIX 6-port RJ45 Jack to BIX Strip (AX100798)
This bix block has space for 6 runs of 4 pair cable per side. It is used to terminate six 4 pair cables to six RJ45 female ports.
BIX Block Mount (BIX10C)
This bix block mount holds up to two bix blocks. It is typically mounted to a wall.
BIX Block Mount 10 position (BIX10A)
This bix block mount holds up to ten bix blocks. It is typically mounted to a wall.
BIX Block Mount 4 Position (BIX10B)
This bix block mount holds up to four bix blocks. It is typically mounted to a wall.
Bix Test Probe Clip (BIX17A)
This bix test probe (BIX17A) is used for quick tesing of bix distrubution panels. Alligator clips quickly connect to a butt set and the other easliy mates with a bix block for individual pair testing.
Black – 12AWG (20A 125V) NEMA 5-20P to IEC C19 Power Cable – SJT
This power cord consists of a 5-20P male on one end and a C19 female on the other end. It is typically used to connect a server or UPS to a PDU or a wall outlet. These cables are constructed with UL mandated inner plastic frame molds to enhance terminal alignment and produce a high quality connector. The connectors premium quality ensures a snug fit with receptacles. Each assembly is 100% continuity tested and 100% HVT (High Voltage) tested and inspected before shipping.
Black – 12AWG (20A 125V) NEMA 5-20P to NEMA 5-20R Power Cable – SJT
This power cord consists of a 5-20P male on one end and a 5-20R female on the other end. It is typically used as an extension cable. These cables are constructed with UL mandated inner plastic frame molds to enhance terminal alignment and produce a high quality connector. The connectors premium quality ensures a snug fit with receptacles. Each assembly is 100% continuity tested and 100% HVT (High Voltage) tested and inspected before shipping.
Black – 12AWG (20A 125V) NEMA 5-20P to NEMA L5-30R Power Cable – SJT
This power cord consists of a 5-20P male on one end and a L5-30R female on the other end. It is typically used as an adapter cable. These cables are constructed with UL mandated inner plastic frame molds to enhance terminal alignment and produce a high quality connector. The connectors premium quality ensures a snug fit with receptacles. Each assembly is 100% continuity tested and 100% HVT (High Voltage) tested and inspected before shipping.
Black – 14AWG (15A 125V) – 1ft NEMA 5-15P to NEMA 5-20R Power Cable – SJT
This power cord consists of a 5-15P male on one end and a 5-20R female on the other end. It is typically used as an extension cable. These cables are constructed with UL mandated inner plastic frame molds to enhance terminal alignment and produce a high quality connector. The connectors premium quality ensures a snug fit with receptacles. Each assembly is 100% continuity tested and 100% HVT (High Voltage) tested and inspected before shipping.
Black – 14AWG (15A 125V) NEMA 5-15P to IEC C19 Power Cable – SJT
This power cord consists of a 5-15P male on one end and a C19 female on the other end. It is typically used to connect a server or UPS to a PDU or a wall outlet. These cables are constructed with UL mandated inner plastic frame molds to enhance terminal alignment and produce a high quality connector. The connectors premium quality ensures a snug fit with receptacles. Each assembly is 100% continuity tested and 100% HVT (High Voltage) tested and inspected before shipping.
Black – 14AWG (15A 125V) NEMA 5-20P to IEC C13 Power Cable – SJT
This power cord consists of a 5-20P male on one end and a C13 female on the other end. It is typically used to connect a server or UPS to a PDU or a wall outlet. These cables are constructed with UL mandated inner plastic frame molds to enhance terminal alignment and produce a high quality connector. The connectors premium quality ensures a snug fit with receptacles. Each assembly is 100% continuity tested and 100% HVT (High Voltage) tested and inspected before shipping.
Black – 14AWG (15A 250V) NEMA 6-15/20R to IEC C14 Power Cable – SJT
This power cord consists of a C14 male on one end and a 6-15/20R female on the other end. It is typically used as an extension cable. These cables are constructed with UL mandated inner plastic frame molds to enhance terminal alignment and produce a high quality connector. The connectors premium quality ensures a snug fit with receptacles. Each assembly is 100% continuity tested and 100% HVT (High Voltage) tested and inspected before shipping
Black – 18AWG (7A 125V) – NEMA 1-15P Down Angle to IEC C7 Right Angle Power Cable – SPT-2
This power cord consists of a 1-15P down angle male on one end and a C7 right angle female on the other end. It is typically used to connect a server or UPS to a PDU or a wall outlet. These cables are constructed with UL mandated inner plastic frame molds to enhance terminal alignment and produce a high quality connector. The connectors premium quality ensures a snug fit with receptacles. Each assembly is 100% continuity tested and 100% HVT (High Voltage) tested and inspected before shipping.
