No products in the cart.
RJ45 Cat5e Snagless Boot (No Tab) – Clear – 50 pack
The RJ45 boots are designed to fit most Cat5e cables. This boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The boots are available in 50 packs.
RJ45 CAT6 Snagless Boot (No Tab) – Clear – 50 Pack
The RJ45 boots are designed to fit most CAT6 cables. This boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The boots are available as 50 or 100 packs.
RJ45 CAT6a Boot for Slim Cable – Clear – 50 Pack
The RJ45 boots are designed to fit most Cat6a slim cables. This boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 or 100 packs.
RJ45 Cat6a/Cat7 Boot for STP Plugs – 100 pack
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 100 packs.
RJ45 Cat6a/Cat7 Boot for STP Plugs with External SR 8.0mm – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Push-On Bubble Style Cat6 Boots (50 pack)
The RJ45 push-on boots are designed to fit most Cat6 cables. The bubble style prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
