4-Port VGA Video Splitter with 3.5mm Audio – 2048×1536
This VGA with audio splitter enables you to display one VGA source on four VGA displays simultaneously. It is typically used to split a PC’s VGA video output to four VGA monitors or projectors.
4-Port VGA Video Switch (4 Inputs, 1 Output Selector)
This VGA video switch enables you to display a VGA signal on one monitor/projector from up to four video sources. It has an autoscan feature which will automatically skip over turned off inputs.
4-Port VGA Video Switch (4 Inputs, 1 Output Selector)
This VGA video switch enables you to display a VGA signal on one monitor/projector from up to four video sources. It has an autoscan feature which will automatically skip over turned off inputs.
4-Way Horizontal Splitter -7dB 5-1002 MHz High Performance for Coax Cable TV & Internet
Reliability, quality and performance define the Antronix series digital splitter.Our horizontal and vertical digital splitters have been designed specifically for today’s two-way broadband networks. Low intermodulation distortion and 40 dB port-to-port return band isolation prevent high power cable modem signals from distorting neighboring port signals. Capacitively coupled F-ports block AC surges and prevent hum modulation. Additionally, our digital splitters are among the most robust in the industry. Every port on each CMC2000-A series splitter is 6 kV ring wave surge protected, while our proprietary ferrites remain ultra-linear following several surges. The splitter ports are SCTE compliant with 1 inch spacing. The CMC2000-A series digital splitters employ high “Q” surface mount technology (SMT) components, guaranteeing consistent performance over time and temperature.
42U A/V and Networking Cabinet – Secure, Versatile, and Spacious Storage Solution in Black Finish
This 42U A/V and networking cabinet comes with a lockable glass front door, a lockable solid rear door and removable/lockable side panels. It comes assembled and pre-loaded with a four fan top, nine vented shelves, solid blank filler panels and tapped rails. Cable entries are available on the top and bottom of the cabinet. There are also removable panels at the bottom of the cabinet for increased air flow. It is typically used in home installations, security applications, restaurants/bars and offices where server depth is not required.
42U Vertical Cable Manager – Front Facing
This vertical cable manager is 42U in height, has a hinged front cover and is forward facing for easy access to cabling. It is used to organize cables on a relay rack which helps maintain proper airflow. The manager can also be used as a link for joining multiple relay racks together.
42U Vertical Cable Manager – Front Facing
This vertical cable manager is 42U in height, has a hinged front cover and is forward facing for easy access to cabling. It is used to organize cables on a relay rack which helps maintain proper airflow. The manager can also be used as a link for joining multiple relay racks together.
48-Port Angled CAT5e Patch Panel, 19″ Rackmount 2U – Pass-Through
This 48 port Cat5e 2U patch panel has RJ45 female to female feed-through keystone couplers on both ends. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to couple Cat5e patch cables.
48-Port Angled CAT6 Patch Panel, 19″ Rackmount 1U – Pass-Through
This 48 port Cat6 1U patch panel has RJ45 female to female feed-through keystone couplers on both ends. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to couple Cat6 patch cables.
48-port Angled Keystone Patch Panel – 19 inch Rackmount 1U with Cable Manager – Unloaded
This 48 port patch panel comes unloaded and is 1U in height. It can be fitted with standard networking and audio/video keystone inserts and is meant to be mounted on a 19 inch rack or cabinet. It gives you the flexibility to customize the panel to your specific installation requirements.
The following jacks are not compatible with this patch panel: JK-8C5S-BL, JK-8C5S-BK, JK-8C5S-WH, JK-C6PB-WH, JK-C6PB-BK, JK-C6PB-BL
48-Port CAT5e Patch Panel, 19″ Rackmount 2U – 110 Punch-Down
This 48 port Cat5e 2U patch panel has RJ45 female ports on the front and 110 punch-down style terminals on the rear. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to terminate raw Cat5e runs.
48-Port CAT5e Patch Panel, 19″ Rackmount 2U – Pass-Through
This 48 port Cat5e 2U patch panel has RJ45 female to female feed-through keystone couplers on both ends. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to couple Cat5e patch cables.
48-Port CAT6 Patch Panel, 19″ Rackmount 1U – 110 Punch-Down
This 48 port Cat6 1U patch panel has RJ45 female ports on the front and 110 punch-down style terminals on the rear. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to terminate raw Cat5e and Cat6 runs.
48-Port CAT6 Patch Panel, 19″ Rackmount 2U – 110 Punch-Down
This 48 port Cat6 2U patch panel has RJ45 female ports on the front and 110 punch-down style terminals on the rear. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to terminate raw Cat5e and Cat6 runs.
48-Port CAT6 Patch Panel, 19″ Rackmount 2U – Pass-Through
This 48 port Cat6 2U patch panel has RJ45 female to female feed-through keystone couplers on both ends. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to couple Cat6 patch cables
48-Port CAT6A Patch Panel, 19″ Rackmount 2U – 110 Punch-Down
This 48 port Cat6a 2U patch panel has RJ45 female ports on the front and 110 punch-down terminals on the rear. It is fitted with 110 jacks and is meant to be mounted on a 19″ rack or cabinet. It provides an easy method to terminate raw Cat6a cable runs.
48-Port Cat6a Patch Panel, 19″ Rackmount 2U – Pass-Through
This 48 port Cat6a 2U patch panel has RJ45 female to female feed-through keystone couplers on both ends. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to couple Cat6a patch cables.
48-port F-Type Patch Panel, 19 inch Rackmount 2U
This 48 port F-type patchbay has F-type female connectors on the front and rear. It is 2U in height and meant to be mounted on a 19″ rack or cabinet.
48-Port HDMI patch panel, 19 inch rackmount 2U
This 48 port HDMI patchbay has HDMI female connectors on the front and rear. It is 2U in height and meant to be mounted on a 19″ rack or cabinet.
