2m x 23mm Double Sided Adhesive Tape for Floor Track/Ramp
This tape can be used with floor track/ramp. It is a double sided adhesive tape.
Perplas 6ft Floor Track/Ramp – Tan
This Raceway product is a tan track/ramp that is six feet in length. It is primarily used to secure, protect and conceal all types of cabling in residential and commercial applications.
Perplas 6ft Floor Track/Ramp – Grey
This Raceway product is a grey track/ramp that is six feet in length. It is primarily used to secure, protect and conceal all types of cabling in residential and commercial applications.
Floor Track Cord Cover with Adhesive Tape – Grey
This Raceway product is a floor track cord cover that is six feet in length. It is primarily used to secure, protect and conceal all types of cabling in residential and commercial applications. Double sided adhesive tape is also included.
Floor Track Cord Cover with Adhesive Tape – Black
This Raceway product is a floor track cord cover that is six feet in length. It is primarily used to secure, protect and conceal all types of cabling in residential and commercial applications. Double sided adhesive tape is also included.
Threaded Rod, 1/4-20, 18 inch length, Zinc
This zinc plated threaded rod has a 1/4-20 thread and is 18 inch in length. It is compatible with our CC-BC0250 beam clamp and CC-HN01-075-25 nuts and is typically used to secure multiple loop cable hangers to our beam clamps in a perpendicular or parallel fashion.
*Nuts sold Separately
Hex Nut, 1/4-20, Quadrex Zinc (25 pack)
These hex nuts are zinc plated and have a 1/4-20 thread. They are used along with 1/4-20 screws and rods (part numbers CC-SC01-075-25, CC-SC01-125-25 and CC-TR01-18).
Screw, 1/4-20, 1.25 inch Length, Pan-Head, Quadrex Zinc (25 pack)
These screws have a 1/4-20 thread and are 1.25 inches in length. They are compatible with our CC-BC0250 beam clamp and CC-HN01-075-25 nuts and are typically used to secure our loop cable hangers to our beam clamps in a perpendicular fashion. They are zinc plated and are sold in packs of 25.
*Nuts Sold Separately
Screw, 1/4-20, 3/4 inch Length, Pan-Head, Quadrex Zinc (25 pack)
These screws have a 1/4-20 thread and are 3/4 inches in length. They are compatible with our CC-BC0250 beam clamp and CC-HN01-075-25 nuts and are typically used to secure our loop cable hangers to our beam clamps in a parallel fashion. They are zinc plated and are sold in packs of 25.
*Nuts Sold Separately
1″ Beam Clamp 75lb Load, 1/4-20 Thread
This steel plated beam clamp provides sturdy support for loop cable hangers on I-beams and steel supports.
*Screws, Rods and Nuts Sold Separately
Loop Cable Hanger 5 inch, Plenum Rated
This loop hanger provides sturdy and reliable support for a variety of networking cables such as CAT5e, CAT6, CAT6A and fiber optic cabling. It is flexible, can rotate to any direction and holds a 5 inch diameter bundle cabling without damaging the cable. It is also made of plenum rated material so that it can be used in plenum spaces above ceilings and below floors.
*Beam Clamp, Screws, Rods and Nuts All Sold Separately
Loop Cable Hanger 2.5 inch, Plenum Rated
This loop hanger provides sturdy and reliable support for a variety of networking cables such as CAT5e, CAT6, CAT6A and fiber optic cabling. It is flexible, can rotate to any direction and holds a 2.5 inch diameter bundle cabling without damaging the cable. It is also made of plenum rated material so that it can be used in plenum spaces above ceilings and below floors.
*Beam Clamp, Screws, Rods and Nuts All Sold Separately
Standard Hanger for LMR-400, LMR-500 and LMR-600 Cable
This cable hanger provides sturdy and reliable support for LMR-400, LMR-500 and LMR-600 cables.
Loop Cable Hanger 2 inch, Plenum Rated
This loop hanger provides sturdy and reliable support for a variety of networking cables such as CAT5e, CAT6, CAT6A and fiber optic cabling. It is flexible, can rotate to any direction and holds a 2 inch diameter bundle cabling without damaging the cable. It is also made of plenum rated material so that it can be used in plenum spaces above ceilings and below floors.
*Beam Clamp, Screws, Rods and Nuts All Sold Separately
J-Hook – 2 inch Steel (Used with Threaded Rod and Beam Clamp)
These J-Hooks are convenient for running communications cable and can be used with threaded rods and beam clamps. They support up to 90 Cat5e cables with the center radius of the bundle spread over the 2 inch opening. Attach them easily to various supports, beam clamps and struts. They are also stackable – in parallel or perpendicular orientation for vertical support of multiple tiers of cable and maintain the integrity of high performance data cable.
J-Hook – 2 inch Steel (Used with Beam Clamp)
These J-Hooks are convenient for running communications cable and can be used with beam clamps. They support up to 90 Cat5e cables with the center radius of the bundle spread over the 2 inch opening. Attach them easily to various supports, beam clamps and struts. They are also stackable – in parallel or perpendicular orientation for vertical support of multiple tiers of cable and maintain the integrity of high performance data cable.
J-Hook – 2 inch Plastic (Used with Beam Clamp)
These J-Hooks are convenient for running communications cable and can be used with beam clamps. They support up to 90 Cat5e cables with the center radius of the bundle spread over the 2 inch opening. Attach them easily to various supports, beam clamps and struts. They are also stackable – in parallel or perpendicular orientation for vertical support of multiple tiers of cable and maintain the integrity of high performance data cable.
42U Vertical Cable Manager – Front Facing
This vertical cable manager is 42U in height, has a hinged front cover and is forward facing for easy access to cabling. It is used to organize cables on a relay rack which helps maintain proper airflow. The manager can also be used as a link for joining multiple relay racks together.
26U Vertical Cable Manager – Front Facing
This vertical cable manager is 26U in height, has a hinged front cover and is forward facing for easy access to cabling. It is used to organize cables on a relay rack which helps maintain proper airflow. The manager can also be used as a link for joining multiple relay racks together.
Vertical Cable Manager for Relay Rack – 42U
The vertical cable manager is 42U in height, has oval cable pass through openings and a hinged cover for easy access to cabling. It is typically used to organize cables running vertically on relay racks.
