No products in the cart.
RJ45 Cat6 Plug with Snagless Tab for Stranded Round Cable (8P 8C)
This modular RJ45 Cat6 connector with snagless tab is a 8 position, 8 conductor plug. It’s typically terminated on 8 conductor stranded round cable. They are available as 50 or 100 packs.
RJ45 CAT6 Snagless Boot (No Tab) – Clear – 50 Pack
The RJ45 boots are designed to fit most CAT6 cables. This boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The boots are available as 50 or 100 packs.
RJ45 Cat6/Cat6a Locking 3-pcs Plug with Boot for Solid or Stranded Round Cable (8P 8C)
This locking RJ45 Cat6/Cat6a plug is an 8 position, 8 conductor plug. It’s typically terminated on 4 pair stranded or solid round cable. The plug has a push-in locking tab which helps prevent accidental disconnects for critical networking applications. Each plug comes with a key which is required to easily unlock the connector. They are available as 50 or 100 packs.
RJ45 CAT6a Boot for Slim Cable – Clear – 50 Pack
The RJ45 boots are designed to fit most Cat6a slim cables. This boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 or 100 packs.
RJ45 Cat6a Plug w/ Insert (Solid or Stranded) (8P 8C) – 50 Pack
This modular RJ45 Cat6a connector with insert is a 8 position, 8 conductor plug. It’s typically terminated on 8 conductor stranded round cable.
RJ45 Cat6a Shielded 3-pcs Plug (Solid or Stranded) (8P 8C) – 50 pack
This modular RJ45 Cat6a shielded connector is an 8 position, 8 conductor plug. The plug is typically used to terminate shielded Cat6a solid or stranded cable.
RJ45 Cat6a Shielded Plug with Insert (Solid or Stranded) (8P 8C) – 50 Pack
This modular RJ45 Cat6a connector is a 8 position, 8 conductor plug. It’s typically terminated on 8 conductor solid or stranded round cable. They are available as 50 or 100 packs.
RJ45 Cat6a/Cat7 Boot for STP Plugs – 100 pack
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 100 packs.
RJ45 Cat6a/Cat7 Boot for STP Plugs with External SR 8.0mm – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Cat7 Shielded Plug with Lacing Bar Insert and External Strain Relief (Solid or Stranded) (8P 8C)
This modular RJ45 Cat7 connector is a 8 position, 8 conductor plug. It’s typically terminated on 4 pair solid or stranded round cable and has an external crimp strain relief. Designed to meet CAT7 performance standards, it can also be used on CAT6A cable. They are available as 50 or 100 packs.
RJ45 Cat7 Shielded Plug with Lacing Bar Insert and External Strain Relief (Solid or Stranded) (8P 8C)
This modular RJ45 Cat7 connector is a 8 position, 8 conductor plug. It’s typically terminated on 4 pair solid or stranded round cable and has an external crimp strain relief. Designed to meet CAT7 performance standards, it can also be used on CAT6A cable. They are available as 50 or 100 packs.
RJ45 Male Plug to 2x Screw Terminal
This connector consists of a RJ45 male on one end and two screw terminals on the other end. It is typically used in a variety of PoE and CCTV applications.
RJ45 Male Plug to 4x Screw Terminal
This connector consists of a RJ45 male on one end and four screw terminals on the other end. It is typically used in a variety of PoE and CCTV applications.
RJ45 Male Plug to 8x Screw Terminal
This connector consists of a RJ45 male on one end and eight screw terminals on the other end. It is typically used in a variety of PoE and CCTV applications. The terminal block is removable for easier termination.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Plug for Flat Cable (8P 8C)
This modular RJ45 connector is a 8 position, 8 conductor plug. It’s typically terminated on 8 conductor flat cable. They are available as 50 or 100 packs.
RJ45 Push-On Bubble Style Cat6 Boots (50 pack)
The RJ45 push-on boots are designed to fit most Cat6 cables. The bubble style prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
TRS (1/4 inch) Stereo Female Solder Connector – Black
This connector is a 1/4 inch stereo female with a solder connection. It is used to be soldered onto audio/video cable.
