![TLH 501](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/TLH-501.jpg?resize=200%2C200&ssl=1)
110 Punch-down and Strip Tool for Wire Diameter – 5mm to 6.2mm
This compact and inexpensive punch-down and jacket strip tool is used to terminate 110 style jacks and patch panels. It can also be used to strip the outside jacket of CAT3, CAT5e, CAT6, and CAT6A networking cable.
![TL PUM 180 DIESET 59710](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/TL-PUM-180-DIESET__59710.jpg?resize=200%2C200&ssl=1)
180 Degree Die Set for Punch-Down Tool
This die set is fits both the TL-PUM-180 and TL-PUM-90 handles. It can be used in terminating 180 degree 110 style jacks.
![TL PUM 90 DIESET 42778](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/TL-PUM-90-DIESET__42778.jpg?resize=200%2C200&ssl=1)
90 Degree Die Set for Punch-Down Tool
This die set is fits both the TL-PUM-180 and TL-PUM-90 handles. It can be used in terminating 90 degree 110 style jacks.
![TLH 400 35883](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/TLH-400__35883.jpg?resize=200%2C200&ssl=1)
Impact Punchdown Tool – 110/88 Style
This impact punchdown tool is used to terminate 110/88 style jacks and patch panels. The tool also comes with a reversible blade, one side for seating only, the other side for seating and trimming. Some additional features are a rear blade storage compartment and a high/low impact dial.
![41s8MWgzDES](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/41s8MWgzDES.jpg?resize=200%2C200&ssl=1)
Impact Punchdown Tool – 110/88 Style – With Hook & Mini Screw Driver
This impact punchdown tool is used to terminate 110/88 style jacks and patch panels. The tool also comes with a reversible blade, one side for seating only, the other side for seating and trimming. Some additional features are a rear blade storage compartment, a high/low impact dial, wire hook and mini flat head screw driver.
![41s8MWgzDES](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/41s8MWgzDES.jpg?resize=200%2C200&ssl=1)
Impact Punchdown Tool – BIX Style – With Hook & Mini Screw Driver
This impact punchdown tool is used to terminate BIX style jacks and blocks. The tool also comes with a reversible blade, one side for seating only, the other side for seating and trimming. Some additional features are a rear blade storage compartment, a high/low impact dial, wire hook and mini flat head screw driver.
![TL PUM 90 alt 52878](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/TL-PUM-90_alt__52878.jpg?resize=200%2C200&ssl=1)
Multipair 110 Style Punch-Down Tool for 180 Degree Jacks
This punch-down tool is used to terminate 180 degree 110 style jacks. It allows for faster and more accurate jack termination with one simple motion. It also features built-in blades which cut off excess wire after termination. The tool is designed with a durable steel body with an ergonomically friendly handle.
![TL PUM 90 alt 52878](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/TL-PUM-90_alt__52878.jpg?resize=200%2C200&ssl=1)
Multipair 110 Style Punch-Down Tool for 90 Degree Jacks
This punch-down tool is used to terminate 90 degree 110 style jacks. It allows for faster and more accurate jack termination with one simple motion. It also features built-in blades which cut off excess wire after termination. The tool is designed with a durable steel body with an ergonomically friendly handle.
![TLH 410 96098](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/TLH-410__96098.jpg?resize=200%2C200&ssl=1)
Professional 110/88 Style Impact Punchdown Tool – 4 Pair
This professional impact punchdown tool is used to terminate 4 pairs of 110/88 style terminal block. The tool also comes with reversible blades, one side for seating only, the other side for seating and trimming. Ideal for terminating networking cables on patch panels. This tool saves the installer time and energy by reducing the amount of punch-downs required.
![TL PU H 26235](https://i0.wp.com/rtcelectronics.ca/wp-content/uploads/2022/12/TL-PU-H__26235.jpg?resize=200%2C200&ssl=1)
Punchdown Jack Palm Holder Tool
This punchdown jack palm holder is used to hold a punchdown jack in place when terminating jacks in your palm.