No products in the cart.
1000pk 12 inch cable tie (40lb) – UL94 V-2 nylon 66
These cable ties are 12 inches in length with a tensile strength of 40lbs. They are ideal for bundling and organizing cables together indoors.
100pk 12 inch cable tie (40lb) – UV & weather resistant nylon 66
These cable ties are 12 inches in length with a tensile strength of 40lbs. They are ideal for bundling and organizing cables together indoors.
100pk 4 inch cable tie (18lb) – UL94 V-2 nylon 66
These cable ties are 4 inches in length with a tensile strength of 18lbs. They are ideal for bundling and organizing cables together indoors.
100pk 8 inch cable tie (18lb) – UL94 V-2 nylon 66
These cable ties are 8 inches in length with a tensile strength of 18lbs. They are ideal for bundling and organizing cables together indoors.
500ft 4 Pair Cat6A 10Gig UTP Stranded 28AWG Ultra-Thin Bulk Cable FT4
This bulk riser rated Cat6a cable is 500 feet in length and consists of 4 pairs of 28AWG stranded wires. It is typically used to manufacture Cat6a ultra-thin patch cables and terminated with Cat6a RJ45 plugs designed for ultra-thin cable.
Cat6a UTP 10GB Ultra-Thin Patch Cable – CMR Riser Rated
This Cat6a Ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for 10Gb Ethernet network connections such as patch panels, switches, computers and routers. Its ultra-thin cable design works perfectly in high density server room applications. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat5e 350MHz Molded Patch Cable – CMR Riser Rated
This Cat5e ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6 550MHz Molded Patch Cable – CMR Riser Rated
This Cat6 ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6 UTP Ultra-Thin Patch Cable – CMR Riser Rated
This Cat6 Ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for Ethernet network connections such as patch panels, switches, computers and routers. It’s ultra-thin cable design works perfectly in high density server room applications. The cable jacket is also CMR (riser) fire rated.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Push-On Bubble Style Cat6 Boots (50 pack)
The RJ45 push-on boots are designed to fit most Cat6 cables. The bubble style prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Push-On Bubble Style Cat6 Boots (50 pack)
The RJ45 push-on boots are designed to fit most Cat6 cables. The bubble style prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
White Cat6 RJ45 Keystone Jack and110 Punch-Down Stand Keystone
CAT 6 RJ45 Heavy Duty Keystone Jack supports 10 Gigabit Ethernet, meeting ANSI/TIA/EIA 568-C.2 standards. UL Listed with T568A and T568B color-coded labels, this jack provides reliable Gigabit Ethernet speeds and supports various wiring methods. Its robust construction includes impact-resistant housing, gold-plated RJ45 contacts, and dual IDC terminals for secure connections.
