RJ45 Cat7 Shielded Plug with Lacing Bar Insert and External Strain Relief (Solid or Stranded) (8P 8C)
This modular RJ45 Cat7 connector is a 8 position, 8 conductor plug. It’s typically terminated on 4 pair solid or stranded round cable and has an external crimp strain relief. Designed to meet CAT7 performance standards, it can also be used on CAT6A cable. They are available as 50 or 100 packs.
RJ45 Cat7 Shielded Plug with Lacing Bar Insert and External Strain Relief (Solid or Stranded) (8P 8C)
This modular RJ45 Cat7 connector is a 8 position, 8 conductor plug. It’s typically terminated on 4 pair solid or stranded round cable and has an external crimp strain relief. Designed to meet CAT7 performance standards, it can also be used on CAT6A cable. They are available as 50 or 100 packs.
RJ45 Female Port Dust Cap – Black (100 pack)
This dust cap fits RJ45 female ports. It is typically used to help keep contaminants out of RJ45 ports.
RJ45 Inline Coupler CAT 5E – White
The RJ45 Inline Coupler Cat 5e in white offers a convenient solution for seamlessly connecting two RJ45 male network cables.
RJ45 Inline Coupler Cat 6 – White
The RJ45 Inline Coupler Cat 6 in white offers an efficient solution for interconnecting two RJ45 male network cables. Featuring female connectors on both ends, this Cat 6 coupler ensures seamless transmission and connectivity, maintaining high-speed data transfer between Ethernet cables
RJ45 Jack, 110 Style Punch-Down Cat6 Shielded
This keystone insert consists of a RJ45 Cat6 Shielded Jack female on one end and a standard 110 punch down on the other end. It is typically used to fit into a standard keystone opening and connect a RJ45 Cat6 cable to terminate.
RJ45 Keystone Jack, Female to Female Cat6 Shielded
This slim profile keystone insert consists of a Cat6 RJ45 female on one end and a Cat6 RJ45 female on the other end. It is typically used to snap into a standard keystone opening and connect a RJ45 Cat6 male cable coming from within the wall to a RJ45 Cat 6 cable going to a source or device.
RJ45 Keystone Jack, Female to Female Cat6a Shielded
This slim profile keystone insert consists of a Cat6a RJ45 female on one end and a Cat6a RJ45 female on the other end. It is typically used to snap into a standard keystone opening and connect a RJ45 Cat6a male cable coming from within the wall to a RJ45 Cat 6a cable going to a source or device.
RJ45 Male Plug Dust Cap – Black (100 pack)
This dust cap fits RJ45 male plug. It is typically used to help keep contaminants off of RJ45 plugs.
RJ45 Male Plug to 2x Screw Terminal
This connector consists of a RJ45 male on one end and two screw terminals on the other end. It is typically used in a variety of PoE and CCTV applications.
RJ45 Male Plug to 2x Screw Terminal
This connector consists of a RJ45 male on one end and two screw terminals on the other end. It is typically used in a variety of PoE and CCTV applications.
RJ45 Male Plug to 4x Screw Terminal
This connector consists of a RJ45 male on one end and four screw terminals on the other end. It is typically used in a variety of PoE and CCTV applications.
RJ45 Male Plug to 4x Screw Terminal
This connector consists of a RJ45 male on one end and four screw terminals on the other end. It is typically used in a variety of PoE and CCTV applications.
RJ45 Male Plug to 8x Screw Terminal
This connector consists of a RJ45 male on one end and eight screw terminals on the other end. It is typically used in a variety of PoE and CCTV applications. The terminal block is removable for easier termination.
RJ45 Male Plug to 8x Screw Terminal
This connector consists of a RJ45 male on one end and eight screw terminals on the other end. It is typically used in a variety of PoE and CCTV applications. The terminal block is removable for easier termination.
RJ45 Male with IP68 Shroud to Blunt Cat6 Solid UTP Gel Filled Outdoor UV / Direct Burial Pigtail Cable
This Cat6 UTP gel filled outdoor UV direct burial Ethernet cable consists of RJ45 male with IP68 rated shroud on one end and and has no termination on the other. The un-terminated end is typically used for punching down onto a jack or panel and the IP68 shroud is intended to mate with our IP68 rated couplers for a weather tight seal. It is typically used outdoors either above or below ground as premise wiring to connect network devices.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
