RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Plug for Flat Cable (8P 8C)
This modular RJ45 connector is a 8 position, 8 conductor plug. It’s typically terminated on 8 conductor flat cable. They are available as 50 or 100 packs.
RJ45 Plug for Flat Cable (8P 8C) 50/pack
This modular RJ45 connector is a 8 position, 8 conductor plug. It’s typically terminated on 8 conductor flat cable. They are available as 50 or 100 packs.
RJ45 Push-On Bubble Style Cat6 Boots (50 pack)
The RJ45 push-on boots are designed to fit most Cat6 cables. The bubble style prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Push-On Bubble Style Cat6 Boots (50 pack)
The RJ45 push-on boots are designed to fit most Cat6 cables. The bubble style prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 to Blunt Cat5e Solid FTP Outdoor UV Direct Burial Pigtail Cable – Black
This Cat5e FTP outdoor UV direct burial ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used outdoors either above or below ground as premise wiring to connect network devices.
RJ45 to Blunt Cat5e Solid UTP Outdoor UV Direct Burial Pigtail Cable – Black
This Cat5e UTP outdoor UV direct burial ethernet cable consists of a RJ45 male on one end and has no termination on the other. The un-terminated end is typically used for punching down onto a jack or panel and the RJ45 end can be used outdoors either above or below ground as premise wiring to connect network devices.
RJ45 to Blunt Cat6 Solid FTP Outdoor UV Direct Burial Pigtail Cable – Black
This Cat6 UTP gel filled outdoor UV direct burial Ethernet cable consists of RJ45 male with IP68 rated shroud on one end and and has no termination on the other. The un-terminated end is typically used for punching down onto a jack or panel and the IP68 shroud is intended to mate with our IP68 rated couplers for a weather tight seal. It is typically used outdoors either above or below ground as premise wiring to connect network devices.
Rotary Coax Stripper
Our Cable Stripper with Cutter is a professional-grade tool designed for precision cable preparation. Featuring an ergonomic grip and ABS construction, it offers adjustable blade cutting depth and spring tension strength for various cable types. With high-precision steel blades, this versatile tool easily handles RG59, RG6 T&Q, RG11, RJ45, round networking cable, and flat telephone cable, ensuring accurate and smooth stripping.
Rotary Dual blade coaxial wire stripper
Our Rotary Dual Blade Coaxial Wire Stripper is a versatile tool crafted from durable ABS material. With dual blades and adjustable features, it accommodates various cables including RG-58, RG-59, RG-62, RG-6, 3C2V, 4C, 5C, with a maximum range of 10.5mm (RG213). Easily adjust the holder position and blade gap for precise stripping of cables at preset lengths (4mm, 6mm, 8mm, and 12mm), offering unparalleled flexibility. The included hex wrench allows simple adjustment of blade depth, ensuring effortless customization for your cable stripping needs.
ROUND TYPE W:70 X W1:40 X H:15 X H1:10MM X 2M GREY
Wiring Duct with adhesive tape without mounting hole round type, grey color
W:70 x W1:40 X H:15 X H1:10MM * 2
RT-XLR-FMM-01.5
This splitter cable features an XLR female connector on one end and two XLR male connectors on the other, allowing for the duplication of a microphone or XLR output into two balanced channels. It uses high-flex balanced 24AWG cables that ensure optimal audio performance by capturing all highs and lows. The cable’s braided shield provides maximum EMI/RFI noise rejection, maintaining a clean signal. Its multi-stranded copper conductors and ultra-flexible, durable jacket enhance mobility. The FT4 riser fire-rated jacket allows for in-wall use, and the lead-free, silver-laced solder ensures reduced loss and maximum conductivity.
S-Video Female to RCA Female Adapter
This adapter consists of a S-Video female on one end and a RCA female on the other. It is typically used to convert a S-Video male cable to a RCA female cable.
S-Video Female to RCA Male Adapter
This adapter consists of a S-Video female on one end and a RCA male on the other. It is typically used to convert a S-Video male cable to a RCA male cable.
S-Video Male to RCA Female Adapter
This adapter consists of a S-Video male on one end and a RCA female on the other. It is typically used to convert a RCA male cable to a S-Video male cable.
SB 3.1 Type-C to Docking Station with PD Charging – Black
This USB 3.1 Type-C adapter consists of a USB 3.1 Type-C male on one end and a HDMI female, mini-DisplayPort, USB 3.1 Type-C female, RJ45 female, VGA female, 3x USB 3.0 female, 3.5mm stereo female, SD card slot and a Micro SD card slot on the other end. It allows you to connect additional devices through your USB Type-C port and create a permanent or temporary workstation.
Schuko CEE 7/16 (Euro) Plug to C7 Power Adapter
This adapter consists of a SCHUKO CEE (Euro) 7/16 plug on one end and a C7 receptacle on the other. It is primarily used to adapt or convert an existing power cable.
