1100ft 1/2 inch Corrugated Black Split Loom
This 1/2 inch corrugated split loom tubing is black in color and 1100 feet in length. It is primarily used to provide protection and organization to cables and wire harnesses.
12 FT. HEAVY-DUTY INDOOR EXTENSION CORD; GREY
Indoor, ideal for air conditioners Grounded – polarized13 AMP/ 16/3 AWG Length – 12ft. / 3,66m1 outlet Color – Grey
12 inch Adhesive Wall Heat-Shrink 3:1 Ratio – Black
This adhesive heat shrink is 12 inches in length and has a 3:1 shrink ratio. It is typically used to seal and protect cable splices, bundle cables or add strain relief to cable terminations.
12 inch M6 Disconnecting Grounding Cable and Hardware Kit, 14AWG – Green/Yellow
This grounding kit provides the cable and mounting hardware required to ground our network racks and cabinets. This particular kit comes with a disconnecting cable which makes it ideal on doors and other detachable components.
12 inch M6 Grounding Cable and Hardware Kit, 14AWG – Green/Yellow
This grounding kit provides the cable and mounting hardware required to ground our network racks and cabinets.
12 inch x 2 inch Rip-Tie Industrial Adhesive Back Wrap Velcro Strips – Black (5 mated pairs)
These adhesive back strips are ideal for bundling and organizing computer and network cables against any smooth surface. The rubber base adhesive back allows for attachment to desks, wall, computers and many other kinds of equipment. Made in the USA using Velcro® brand hook and loop touch fasteners material.
12-Port CAT5e Patch Panel, Self Mount Patch Panel – 110 Punch-Down
This 12 port Cat5e self mount patch panel has RJ45 female ports on the front and 110 punch-down style terminals on the rear. It is meant to be mounted on a wall and provides an easy method to terminate raw Cat5e runs.
12-Port CAT6 Patch Panel, 19″ Rackmount 1U – 110 Punch-Down
This 12 port Cat6 1U patch panel has RJ45 female ports on the front and 110 punch-down style terminals on the rear. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to terminate raw Cat5e and Cat6 runs.
12-Port CAT6 Patch Panel, Self Mount Patch Panel – 110 Punch-Down
This 12 port Cat6 self mount patch panel has RJ45 female ports on the front and 110 punch-down style terminals on the rear. It is meant to be mounted on a wall and provides an easy method to terminate raw Cat5e and Cat6 runs.
12-Port XLR Female + 4-port TRS Female patch panel, 19 inch rackmount 1U
This 12 port patchbay has four 1/4″ female and twelve locking XLR female connectors on the front and solder connectors on the back. It is meant to be mounted on a 19″ rack or cabinet and used as a return snake patch panel.
12-Port XLR Female + 4-port TRS Female patch panel, 19 inch rackmount 1U
This 12 port patchbay has four 1/4″ female and twelve locking XLR female connectors on the front and solder connectors on the back. It is meant to be mounted on a 19″ rack or cabinet and used as a return snake patch panel.
12-Port XLR Female + 4-port XLR Male patch panel, 19 inch rackmount 1U
This 12 port XLR patchbay has four XLR male and twelve locking XLR female connectors on the front and solder connectors on the back. It is meant to be mounted on a 19″ rack or cabinet and used as a return snake patch panel.
120 Watt Microphone PA Mono Amplifier w/ USB/SD/FM/Bluetooth – 70V Output & Mic Talkover
This 120-watt microphone amplifier takes your voice to the next level! The amplifier’s wide frequency response makes it suitable for amplifying music or vocal program material. It can be used for live bands, office paging systems, public announcements, or a variety of other installations. It’s got two front ¼’ inputs for mics, each with its own independent volume control and talkover. Plus, there’s two stereo RCA inputs on the back – including one that takes low level phono input from a turntable. The 3-band EQ (100 Hz, 1 kHz, 8 kHz) lets you tweak the sound to your exact requirements. This amp is compatible with 70 V PA systems too. An unswitched outlet on the back means you’ll never be looking for an outlet. Runs on 110 and 220 V.
12V 5A AC/DC Power Supply Adapter For Security Cameras
This is a 12V 5A AC/DC Power Supply Adapter for Security Cameras. Regulated output protects your electronic devices from over voltage damages, and increase life of electronic circuits and products. Perfect for security Cameras, etc.
13 – 24″ Curve Triple TV/Monitor Stand-Alone Desk Mount
A desk mount that allows for a neat and secure triple monitor set up. Tilt, swivel and height adjustments mean you can customize the setup exactly to your needs.
13 – 24″ Triple TV/Monitor Desk Stand
A desk mount that allows for a neat and secure triple monitor set up. Tilt, swivel and height adjustments mean you can customize the setup exactly to your needs.
13 – 27″ TV/Monitor Dual Screen Desk Stand
This desk mount allows for a neat and secure dual monitor set up. Tilt, swivel and height adjustments mean you can customize the setup exactly to your needs.
13-32″ Dual Monitor/ TV Desk Mount Dual Installation Option Grommet/Clamp
The DM-340 is upgraded monitor arm, which double joint is able to be tightened, so you can adjust exactly how stationary you want everything to be. Constructed of high grade steel, this rugged mount built to resist scratches and supports screens up to 8kg/17.6 lbs and 32″ in size.
13-32″ Single Monitor/ TV Desk Mount Dual Installation Option Grommet/Clamp
The DM-335 is upgraded monitor arm, which double joint is able to be tightened, so you can adjust exactly how stationary you want everything to be. Constructed of high grade steel, this rugged mount built to resist scratches and supports screens up to 8kg/17.6 lbs and 32″ in size.
13mm Screws and Hex Nuts for Securing D-Cut Connectors to Patch Panels and Wall Plates
This kit consists of 2 hex nuts and 2 screws. It is used to secure D-Cut connectors to wall plates and panels.
