No products in the cart.
Cat6 UTP Micro-Thin Molded Patch Cable – 32AWG – Riser CMR
This Cat6 Ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for Ethernet network connections such as patch panels, switches, computers and routers. It’s micro-thin cable design works perfectly for interconnecting networking equipment in datacenters where cable management space is extremely important.
Cat6a UTP 10GB Ultra-Thin Patch Cable – CMR Riser Rated
This Cat6a Ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for 10Gb Ethernet network connections such as patch panels, switches, computers and routers. Its ultra-thin cable design works perfectly in high density server room applications. The cable jacket is also CMR (riser) fire rated.
Electrical Tape 7mil 3/4 Wide 60ft Roll
This electrical tape is ideal for all kinds of electrical and mechanical applications, such as cable insulation, wire bundling and reinforcing. It’s extremely flexible with good adhesion and conformability. Available in standard black and nine assorted colors for easy identification or color coding.
Junction Box Mounting Bracket for Glass Dome Cameras
This junction box mounting bracket is designed to mount a dome camera. It has side and bottom inlets for easier installation. It is constructed of treated aluminum alloy material for better protection against the elements in outdoor applications.
Junction Box Mounting Bracket for Turret Cameras With Matrix IR
This junction box mounting bracket is designed to mount a turret IP camera. It has side and bottom inlets for easier installation. It is constructed of treated aluminum alloy material for better protection against the elements in outdoor applications.
Junction Box Mounting Bracket for Turret IP Color Night Vision Cameras
This junction box mounting bracket is designed to mount a turret IP color night vision camera or a dome varifocal camera. It has side and bottom inlets for easier installation. It is constructed of treated aluminum alloy material for better protection against the elements in outdoor applications.
RJ45 Cat5e 350MHz Molded Patch Cable – CMR Riser Rated
This Cat5e ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat5e molded stranded shielded patch cable
This Cat5e molded shielded ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The shielding helps protect against electro-magenetic (EMI) and radio frequency interference (RFI).
RJ45 Cat5e Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat5e ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 Cat6 550MHz Molded Patch Cable – CMR Riser Rated
This Cat6 ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6 Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat6 ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 Cat6 UTP Ultra-Thin Patch Cable – CMR Riser Rated
This Cat6 Ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for Ethernet network connections such as patch panels, switches, computers and routers. It’s ultra-thin cable design works perfectly in high density server room applications. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6a SSTP 10GB Molded Patch Cable- CMR Riser Rated
This Cat6a shielded ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The shielding helps protect against electro-magenetic (EMI) and radio frequency interference (RFI). The cable jacket is also CMR (riser) fire rated.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Push-On Bubble Style Cat6 Boots (50 pack)
The RJ45 push-on boots are designed to fit most Cat6 cables. The bubble style prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
