No products in the cart.
Electrical Tape 7mil 3/4 Wide 60ft Roll
This electrical tape is ideal for all kinds of electrical and mechanical applications, such as cable insulation, wire bundling and reinforcing. It’s extremely flexible with good adhesion and conformability. Available in standard black and nine assorted colors for easy identification or color coding.
NEMA 5-15P to IEC C13 Power Cable – SJT
This power cord consists of a 5-15P male on one end and a C13 female on the other end. It is typically used to connect a networking equipment such as a server to a PDU or a wall outlet. These cables are constructed with UL mandated inner plastic frame molds to enhance terminal alignment and produce a high quality connector. The connectors premium quality ensures a snug fit with receptacles. Each assembly is 100% continuity tested and 100% HVT (High Voltage) tested and inspected before shipping.
Premium RCA Female Solder Connector (6.5mm ID)
This connector is a RCA female with a solder connection. It is used to be soldered onto audio/video cable.
RG6 18AWG Solid Copper Covered Steel 60% AL Braid + 100% Foil 75 Ohm CMR Bulk Cable – Black
This bulk RG6 cable consists of a 18AWG solid center conductor. It is ideal for CATV video applications.
RG6 18AWG Solid Copper Covered Steel 60% AL Braid + 100% Foil 75 Ohm CMR Bulk Cable – Black-1000ft
This bulk RG6 cable consists of a 18AWG solid center conductor. It is ideal for CATV video applications.
RG6 Bare Copper 60% AL Braid + 100% Foil 75 Ohm 18AWG CMR Bulk Cable
SKU: RT-BK-RG641-BK-250
RJ12 Cat3 Slim Profile Jack, 110 Punch-Down
This keystone insert consists of a RJ12 Cat3 Slim Profile Jack female on one end and a standard 110 Punch-Down on the other end. It is typically used to fit into a standard keystone opening and connect a RJ12 Cat3 cable to terminate.
RJ12 Jack, Tool-Less Cat3
This keystone insert consists of a Cat3 Tool-Less RJ12 female on one end and a terminating connection on the other end. It is typically used to snap into a standard keystone opening and connect a RJ12 Cat3 male cable to self terminate.
RJ45 Cat5e 350MHz Molded Patch Cable – CMR Riser Rated
This Cat5e ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat5e Jack, 110 Punch-Down
This keystone insert consists of a RJ45 Cat5e jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat5e UTP cable.
RJ45 Cat5e molded stranded shielded patch cable
This Cat5e molded shielded ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The shielding helps protect against electro-magenetic (EMI) and radio frequency interference (RFI).
RJ45 Cat5e Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat5e ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 Cat5e180 Degree Jack, 110 Punch-Down
This keystone insert consists of a RJ45 Cat5e180 degree jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat5e UTP cable.
RJ45 Cat6 180 Degree Jack, 110 Punch-Down
This keystone insert consists of a RJ45 Cat6 180 degree jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat6 UTP cable.
RJ45 Cat6 550MHz Molded Patch Cable – CMR Riser Rated
This Cat6 ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6 Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat6 ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 Cat6 UTP Ultra-Thin Patch Cable – CMR Riser Rated
This Cat6 Ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for Ethernet network connections such as patch panels, switches, computers and routers. It’s ultra-thin cable design works perfectly in high density server room applications. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6A Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat6a ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 CAT6A Slim Profile 180 Degree Jack, 110 Punch-Down Style or Tool-Less
This keystone insert consists of a RJ45 Cat6a slim profile 180 degree jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat6a UTP cable.
RJ45 CAT6A Slim Profile Jack, 110 Punch-Down
This keystone insert consists of a RJ45 Cat6a slim profile jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat6a UTP cable.
