RG6 Bare Copper 60% AL Braid + 100% Foil 75 Ohm 18AWG CMR Bulk Cable
SKU: RT-BK-RG641-BK-250RJ12 Cat3 Slim Profile Jack, 110 Punch-Down
This keystone insert consists of a RJ12 Cat3 Slim Profile Jack female on one end and a standard 110 Punch-Down on the other end. It is typically used to fit into a standard keystone opening and connect a RJ12 Cat3 cable to terminate.
RJ12 Jack, Tool-Less Cat3
This keystone insert consists of a Cat3 Tool-Less RJ12 female on one end and a terminating connection on the other end. It is typically used to snap into a standard keystone opening and connect a RJ12 Cat3 male cable to self terminate.
RJ45 Cat5e 350MHz Molded Patch Cable – CMR Riser Rated
This Cat5e ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat5e Jack, 110 Punch-Down
This keystone insert consists of a RJ45 Cat5e jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat5e UTP cable.
RJ45 Cat5e Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat5e ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 Cat5e180 Degree Jack, 110 Punch-Down
This keystone insert consists of a RJ45 Cat5e180 degree jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat5e UTP cable.
RJ45 Cat6 180 Degree Jack, 110 Punch-Down
This keystone insert consists of a RJ45 Cat6 180 degree jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat6 UTP cable.
RJ45 Cat6 550MHz Molded Patch Cable – CMR Riser Rated
This Cat6 ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6 Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat6 ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 Cat6 UTP Ultra-Thin Patch Cable – CMR Riser Rated
This Cat6 Ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for Ethernet network connections such as patch panels, switches, computers and routers. It’s ultra-thin cable design works perfectly in high density server room applications. The cable jacket is also CMR (riser) fire rated.
RJ45 CAT6A Slim Profile 180 Degree Jack, 110 Punch-Down Style or Tool-Less
This keystone insert consists of a RJ45 Cat6a slim profile 180 degree jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat6a UTP cable.
RJ45 CAT6A Slim Profile Jack, 110 Punch-Down
This keystone insert consists of a RJ45 Cat6a slim profile jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat6a UTP cable.
RJ45 Cat6a SSTP 10GB Molded Patch Cable- CMR Riser Rated
This Cat6a shielded ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The shielding helps protect against electro-magenetic (EMI) and radio frequency interference (RFI). The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6a UTP 10GB Molded Patch Cable – CMR Riser Rated
This Cat6a ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6a/Cat7 Boot for STP Plugs with External SR 8.0mm – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Cat6a/Cat7 Boot for STP Plugs with External SR 8.0mm – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.