RJ45 Cat6A Plenum UTP Solid Patch Cable – CMP/FT6
This FT6 plenum rated Cat6a ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers.
RJ45 CAT6A Slim Profile 180 Degree Jack, 110 Punch-Down Style or Tool-Less
This keystone insert consists of a RJ45 Cat6a slim profile 180 degree jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat6a UTP cable.
RJ45 CAT6A Slim Profile Jack, 110 Punch-Down
This keystone insert consists of a RJ45 Cat6a slim profile jack female on one end and a standard 110 punch down on the other end. It fits into a standard keystone opening and used to terminate bulk Cat6a UTP cable.
RJ45 Cat6a SSTP 10GB Molded Patch Cable- CMR Riser Rated
This Cat6a shielded ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The shielding helps protect against electro-magenetic (EMI) and radio frequency interference (RFI). The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6a UTP 10GB Molded Patch Cable – CMR Riser Rated
This Cat6a ethernet cable consists of a RJ45 male on one end and a RJ45 male on the other. It is typically used for ethernet network connections such as patch panels, switches and computers to routers. The cable jacket is also CMR (riser) fire rated.
RJ45 Cat6a/Cat7 Boot for STP Plugs with External SR 8.0mm – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Cat6a/Cat7 Boot for STP Plugs with External SR 8.0mm – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6a and Cat7 cables. This style of boot slides over the crimped RJ45 plug. The protective hood prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat5e Boots – 5.9mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat5e cables with diameter of 5.0mm to 5.4mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Boots – 6.8mm ID – (50 pack)
The RJ45 molded style boots are designed to fit most Cat6 and Cat6a cables with diameter of 6.0mm to 6.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 packs and in 10 different colors.
RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Molded Style Cat6 Shielded and CAT6a Boots – 7.3mm ID
The RJ45 molded style boots are designed to fit most Cat6 shielded and Cat6a cables with diameter of 7.3mm approximately. This molded style boot sits flush with a RJ45 plug and is inserted onto the plug prior to crimping. The protective hood prevents the RJ45 release clip from snagging. The boots are available in 50 or 100 packs and in 10 different colors.
RJ45 Push-On Bubble Style Cat6 Boots (50 pack)
The RJ45 push-on boots are designed to fit most Cat6 cables. The bubble style prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
RJ45 Push-On Bubble Style Cat6 Boots (50 pack)
The RJ45 push-on boots are designed to fit most Cat6 cables. The bubble style prevents the RJ45 release clip from snagging. The boots are available as 50 packs.
Skynet Cables: 1000ft 4 Pair Cat6 Solid U/UTP 550MHz 23AWG CMR Riser Bulk Cable
This Skynet Cables bulk CAT6 cable comprises 4 pairs of 23AWG solid bare copper wires. Tailored for data networking, PoE, security networking, and voice applications, this cable is specifically crafted for riser environments, serving as premise wiring, commonly terminated from a patch panel to a Cat6 jack.
Skynet Cables: 4 Pair Cat5e Solid U/UTP 350MHz 24AWG CMR Riser Bulk Cable
This Skynet Cables bulk CAT5e cable features 4 pairs of 24AWG solid bare copper wires. Tailored for data networking, PoE, security networking, and voice applications, this cable is engineered with a riser (CMR) rating, c(ETL)us listing, RoHS compliance, and meets or surpasses CAT5e ANSI/TIA-568.C.2 standards. Ideal for riser settings, it serves as premise wiring and is commonly terminated from a patch panel to a Cat5e jack.
USB 2.0 A Male to A Female Hi-Speed Cable
This USB 2.0 cable consists of a USB A male on one end and a USB A female on the other end. It is typically used to extend a USB A cable.
USB 2.0 A Male to A Male Hi-Speed Cable
This USB 2.0 cable consists of a USB A male on both ends. It is typically used to connect a USB peripheral to your computer such as a USB hub to a PC.
USB 2.0 A Male to B Male Hi-Speed Cable
This USB 2.0 cable consists of a USB A male on one end and a USB B male on the other end. It is typically used to connect a USB peripheral to your computer such as a printer or scanner to a PC.