No products in the cart.
Impact Bit #2 Phillips 6 inch – Blue
This Philip #2 impact bit is quality made and work well in standard and high torque applications where standard bits may break.
Impact Bit #2 Robertson 4 inch – Red
This Robertson #2 impact bit is quality made and work well in standard and high torque applications where standard bits may break.
Impact Bit #2 Robertson 6 inch – Red
This Robertson #2 impact bit is quality made and work well in standard and high torque applications where standard bits may break.
Impact Double Ended Bit #1 Robertson, #2 Robertson 6 inch – Red/Green
This double ended #1 Robertson, #2 Robertson impact bit is quality made and work well in standard and high torque applications where standard bits may break.
Impact Double Ended Bit #2 Phillips, #2 Robertson 6 inch – Red/Light Blue
This double ended #1 Philips, #2 Robertson impact bit is quality made and work well in standard and high torque applications where standard bits may break.
Impact Driver Bits & Accessories
This Philip #1 impact bit is quality made and work well in standard and high torque applications where standard bits may break.
Impact Punchdown Tool – 110/88 Style
This impact punchdown tool is used to terminate 110/88 style jacks and patch panels. The tool also comes with a reversible blade, one side for seating only, the other side for seating and trimming. Some additional features are a rear blade storage compartment and a high/low impact dial.
Impact Punchdown Tool – 110/88 Style – With Hook & Mini Screw Driver
This impact punchdown tool is used to terminate 110/88 style jacks and patch panels. The tool also comes with a reversible blade, one side for seating only, the other side for seating and trimming. Some additional features are a rear blade storage compartment, a high/low impact dial, wire hook and mini flat head screw driver.
Impact Punchdown Tool – BIX Style – With Hook & Mini Screw Driver
This impact punchdown tool is used to terminate BIX style jacks and blocks. The tool also comes with a reversible blade, one side for seating only, the other side for seating and trimming. Some additional features are a rear blade storage compartment, a high/low impact dial, wire hook and mini flat head screw driver.
LED Heavy Duty Flashlight – 30ft Drop – IANSI FL1 – 350 Lumens – 95m Beam
This 350-Lumen heavy duty flashlight shines with powerful LEDs and shatterproof lens and reflector that can survive a 30-foot drop. Energy Saver mode gives the flash light extended use for the long haul. It has a rubber head and tail cap for shock absorption for added toughness.
LED Heavy Duty Flashlight – 30ft Drop – IP67 – 350 Lumens – 154m Beam
This 350-Lumen heavy duty flashlight shines with powerful LEDs and has an aluminum body that can survive a 30-foot drop. Energy Saver mode gives the flash light extended use for the long haul. It has a rubber head and tail cap for shock absorption and an aluminum body for added toughness.
LED UV Blacklight – Stain Detector
This durable LED flashlight has a slim comfort grip and also features an LED that never needs to be replaced. It has 11 hours of run time and is typically used for pet stains, cleanliness inspections, auto leaks, counterfeits, pest detection, forensics, hunting/fishing or fluorescents.
Magnetic Cable Pulling Tool – Magnepull
This magnetic pulling tool consists of a roller magnet, in-wall metal leader and a pulling chain. The Magnepull allows the installer to direct a wire behind a wall or even carpet to the desired location. Works in walls with or without insulation. The in-wall leader can be attached to the pulling chain, fiber rods or directly to the cable. Rubber wheels prevent wall damage and powerful magnets provide a strong connection.
Magnetic Reference Point Locator – Magnespot
This magnetic tool consists of a transmitter and a receiver which allows you to pinpoint the exact drilling location without measuring. It has the ability to transmit through up to 4 feet of concrete walls or floors. With its audible and illuminating arrow indicators it gives a directional signal to accurately locate the reference transmitter.
Multipair 110 Style Punch-Down Tool for 180 Degree Jacks
This punch-down tool is used to terminate 180 degree 110 style jacks. It allows for faster and more accurate jack termination with one simple motion. It also features built-in blades which cut off excess wire after termination. The tool is designed with a durable steel body with an ergonomically friendly handle.
Multipair 110 Style Punch-Down Tool for 90 Degree Jacks
This punch-down tool is used to terminate 90 degree 110 style jacks. It allows for faster and more accurate jack termination with one simple motion. It also features built-in blades which cut off excess wire after termination. The tool is designed with a durable steel body with an ergonomically friendly handle.
Network Cable Tester & Wire Tracer for BNC, RJ11, RJ12 & RJ45 – 8 Remotes
This network cable tester tests the pin assignments accurately of unshielded and shielded RJ45 cables as well as telephone cables (RJ11 and RJ12) and BNC cables. It allows you to determine if the cable is pinned correctly or if it is mis-wired, shorted or has open circuits. It also measures length, does tone and probe, measures PoE and port flashing. It has a colour LCD screen, ability to save and export test results, cross-talk indication, rechargeable batteries and comes with 8 remotes for multiple location testing.
Network Cable Tester & Wire Tracer for RJ45 UTP/STP Cables
This network cable tester tests the pin assignments accurately of unshielded and shielded RJ45 cables. It allows you to determine if the cable is pinned correctly or if it is mis-wired, shorted or has open circuits. It also measures length, does tone and probe, measures PoE and port flashing. The emitter is powered using 3x AAA batteries and the receiver is powered using 1x 9V battery (batteries not included).
Network Cable Tester for RJ45 UTP/STP, RJ11, RJ12 and BNC Cables
This network cable tester tests the pin assignments accurately of unshielded and shielded RJ45 cables as well as telephone cables (RJ11 and RJ12) and BNC cables. It allows you to determine if the cable is pinned correctly or if it is mis-wired, shorted or has open circuits. The tester has two test modes, fast scroll and slow scroll. The tester is powered using a 9V battery (not included).
Professional 110/88 Style Impact Punchdown Tool – 4 Pair
This professional impact punchdown tool is used to terminate 4 pairs of 110/88 style terminal block. The tool also comes with reversible blades, one side for seating only, the other side for seating and trimming. Ideal for terminating networking cables on patch panels. This tool saves the installer time and energy by reducing the amount of punch-downs required.
