RGB LED Strip Light Amplifier
Three channel RGB amplifier. Maximum 4 Amps per channel/12 Amps total. Used to increase the load capability and extend the signal of the universal RGB controllers. Required if exceeding the maximum load capability of any universal RGB controller. 12VDC operation. 2 x 4-pin RGB pigtail connectors included.
10 Key RF Remote and Controller for RGB LED Strips
You can now control your RGB LED Strip from up to 30 meters with the radio frequency (RF) 10 Key RF Remote and Controller for RGB LED Strips kit
24 Key Remote and Controller for RGB LED Strips
This 24 key infra red RGB remote and LED controller is a cost effective and simple way to control your RGB LED Strip. It offers a good selection of options that will suit the needs of most users.
Grip & Clip Connectors For Custom Extension on RGB LED 5050 iP20 Strips
All you need to do is remove the silicone coating on your Strip to expose the connectors, peel off paper that protects the adhesive on your strip, insert your Strip in the designated end of the connector, close the connectors using pliers and the special grip blades will make a reliable and secure connection for you.
RGB LED Strip Wires with Connector
These RGB LED Strip Wires with Connectors are designed to connect 2 RGB LED strips together. The included 4 pin extension will enable you to use this connector as a male or female connector. These connectors can be soldered directly on the strip to connect them to a controller or to facilitate the connection between sections.
Quick DC Connector For Single Color LED Strip
This type of Single Color LED strip connector is particularly useful when you have to connect left over pieces of Single Color LED strip to a dimmer or a power supply.
Grip & Clip – Strip to Strip RGB Connectors for iP20 strips
These Solderless LED Strip connectors are designed to connect 2 sections of RGB LED strip together. It’s not possible to connect these connectors directly to wires.
L Shape Corner Connector for Single Color Strips
L shape corner connectors for single color 5050 LED strips are an easy and elegant way to go around corners or to make a 90 degree turn. They are available in 2 sizes, 8mm and 10mm. The 8mm connectors will fit 3528 type LED strips and the 10mm ones 5050 LED strips.
RGB LED Strip Connectors: quick connect to quick connect
These RGB LED Strip Solderless Quick Connectors are designed to connect 2 sections 5050 RGB LED strips together. It’s the ideal connector to extend a LED strip or to go around a corner without having to bend and twist your LED strip.
L Shape Corner Connector for 5050 RGB Strips
L shape corner connectors for single color 5050 RGB LED strips are an easy and elegant way to go around corners or to make a 90 degree turn. These corner connectors will fit all RGB 5050 LED strips that are 10mm wide.
RGB Dual Connectors Strip Jointer
This 4PIN connector for LED strips, LED wall-washers, LED underground light,, LED belt light, curtain light, twinkle light and so on.Suitable for dust, water, high sensing performance requirements of the electrical system, the modified HID xenon lamp and dust-proof, waterproof, high pressure, lightweight and beautiful appearance.
White RGB T Shaped 4 Pins 4 Way Female Connector
LED Strip Corner Connector RGB L-shaped Adapter 90 Degree Connector
Our L shape corner connectors for single color 5050 RGB LED strips are an easy and elegant way to go around corners or to make a 90 degree turn. These corner connectors will fit all RGB 5050 LED strips that are 10mm wide. Our plug and play L shape connectors don’t require any soldering or professional equipment.
12V DC Single Color LED Neon Flex
This 12V 8A (96W) power supply was specifically designed to provide stable and reliable power for your LED Strips. The 12V 8A (96W) power supply is ideal to power the following LED Strips
12V 8A (96W) Power supply for LED Strips
This 12V 8A (96W) power supply was specifically designed to provide stable and reliable power for your LED Strips. The 12V 8A (96W) power supply is ideal to power the following LED Strips.
12V 5A (60W) Power supply DC
This 12V 5A (60W) power supply was specifically designed to provide stable and reliable power for your LED Strips. The 12V 5A (60W) power supply is ideal to power the following LED Strips.
12V 4A (48W) Power supply DC
This 12V 4A (48W) power supply was specifically designed to provide stable and reliable power for your LED Strips. The 12V 4A (48W) power supply is ideal to power the following LED Strips
12V 2A (24W) Power supply DC
This 12V 2A (24W) power supply is specially designed to power a short length LED Strip (from 1 meter to about 3 meters, depending on the type of strip). Use it to connect the length of LED Strip that you have remaining once your main project is completed. This power supply is compatible with both RGB and Single Color LED Strips sold at LED Montreal. Simply add a wired controller to your LED Strip in order to get an affordable extra LED lighting. Compact and easy to install, it connects directly into a standard 110V outlet.
5M 2835 SMD, Blue LED strip,12V flexible Non-Waterproof 60 led/m LED tape
High Brightness 2835 LED Strip Light Emitting Diode Tape Ultra-narrow 5mm 2835 DC 12V 5m/Roll Provide Customize Fast Ship
