8MP Dome IP Camera – 2.8mm Fixed Lens – 30m IR Range – Outdoor IP67 Rated
This is a 8MP IP based dome camera which has a maximum resolution of 3840 x 2160 at 15 fps and supportsH.265+ video compression technology along with built-in micro SD/SDHC/SDXC slot. It has IP67 rated housing for external use ,2.8mm fixed lens which delivers a 102° horizontal field of view and offers 100 feet of night vision employing an IR cut filter and IR LEDs.
8MP Dome IP Camera – Varifocal Lens – 30m IR Range – Outdoor IP67 Rated – White
This is a 8MP IP based dome camera which has a maximum resolution of 2688 x 1520 at 30 fps and supports H.265 video compression technology along with built-in micro SD/SDHC/SDXC slot. It has IP67 rated housing for external use, 2.8 to 12 mm motorized varifocal lens which delivers a 105° to 34.5° horizontal field of view and offers 165 feet of night vision employing an IR cut filter and IR LEDs.
8MP Dome TVI, CVI, AHD, CVBS Camera – Fixed Lens – Smart IR with 30m Range – IP67 Rated
This 8MP indoor/outdoor, TVI based dome camera provides a sharp, high definition images in daylight or nighttime settings. The camera comes with 2.8mm or 3.6mm fixed lens which delivers 102.2° or 79° horizontal field of view respectively. Its maximum resolution is 3840 x 2160p at 15 fps. Using TurboHD technology, the high definition video analog signal can be sent over existing coaxial cable, eliminating the need to run new cables. Its housing is IP67 rated for outdoor use.
8MP True WDR Smart Color Turret, Exterior
Empowered by deep learning algorithms, Hikvision AcuSense technology brings human or vehicle target classification alarms to front- and back-end devices. The system can greatly reduce false alarms generated by targets other than humans or vehicles, vastly improving alarm efficiency and effectiveness.
8MP Turret IP Camera – 2.8mm Fixed Lens – 30m IR Range – Outdoor IP67 Rated
This is a 8MP IP based turret camera which has a maximum resolution of 3840 x 2160 at 15 fps and supports H.265+ video compression technology along with built-in micro SD/SDHC/SDXC slot. It has IP67 rated housing for external use and has a 2.8mm or 4mm fixed lens with 102 degree horizontal field of view and offers 100 feet of night vision employing an IR cut filter and IR LEDs.
8MP Turret TVI, CVI, AHD, CVBS Camera – Fixed Lens – Smart IR with 60m Range – IP67 Rated
This 8MP indoor/outdoor, TVI based turret camera provides a sharp, high definition images in daylight or nighttime settings. The camera comes with a 2.8mm or 3.6mm fixed lens which delivers a 102.2° or 79° horizontal field of view respectively. Its maximum resolution is 3840 x 2160p at 15 fps. Using TurboHD technology, the high definition video analog signal can be sent over existing coaxial cable, eliminating the need to run new cables. Its housing is IP67 rated for outdoor use.
8TB 128MB IntelliPower (RPM) / SATA3 Western Digital Purple Drive
This 8TB hard disk drive is engineered to work for surveillance security systems. It is designed for high temperature, always-on, surveillance security systems to ensure reliability and quality video playback.
8×8 HDMI 4K Matrix – 4K*2K@60Hz – YUV 4:4:4 – 18Gbps – HDCP 2.2in/2.2out – IR control
This 8×8 HDMI matrix switch enables you to connect up to eight HDMI sources to up to eight HDMI displays. Any one of the eight inputs can be displayed on any one of the eight outputs. It is typically used to connect HDMI sources such as DVD players, Blu-ray players, satellite receivers or gaming systems to HDMI displays such as HDTVs, HD projectors or HDMI monitors.
8×8 HDMI 4K Matrix – 4K*2K@60Hz – YUV 4:4:4 – 18Gbps – HDCP 2.2in/2.2out – IR control
This 8×8 HDMI matrix switch enables you to connect up to eight HDMI sources to up to eight HDMI displays. Any one of the eight inputs can be displayed on any one of the eight outputs. It is typically used to connect HDMI sources such as DVD players, Blu-ray players, satellite receivers or gaming systems to HDMI displays such as HDTVs, HD projectors or HDMI monitors.
96-Port CAT6 Patch Panel, 19″ Rackmount 4U – 110 Punch-Down
This 96 port Cat6 4U patch panel has RJ45 female ports on the front and 110 punch-down style terminals on the rear. It is meant to be mounted on a 19″ rack or cabinet and provides an easy method to terminate raw Cat5e and Cat6 runs.
9V Industrial Alkaline Batteries – AL-9V (6 per pack)
This 9 volt Industrial Alkaline Battery is sold in packs of 6. They are typically used in electronic devices.
AA Industrial Alkaline Batteries – AL-AA
This Rayovac AA Industrial Alkaline Battery is 1.5 volt. They are sold in packs of 8 or 24. They are typically used in electronic devices.
AA Rechargeable NiMH Batteries (4 per pack)
These AA rechargeable NiMH batteries are 1350 mAh. They are sold in packs of 4 and are typically used in electronic devices.
AA/AAA NiMH Battery Charger
This NiMH Charger works with rechargeable battery sizes AA and AAA.
AAA Industrial Alkaline Batteries – AL-AAA
This AAA Industrial Alkaline Battery is 1.5 volt. They are sold in packs of 8 or 18. They are typically used in electronic devices.
AAA Rechargeable NiMH Batteries (4 per pack)
These AAA rechargeable NiMH batteries are 600 mAh. They are sold in packs of 4 and are typically used in electronic devices.
AC1200 Wireless Dual Band Router
The Archer C50 lets your PC or laptop enjoy connections much faster than Wireless N with Wireless AC technology. With 300Mbps over the 2.4GHz band and 867Mbps over the crystal clear 5GHz band, the Archer C50 is the superior choice for seamless HD streaming, online gaming, and other bandwidth-intensive tasks.
Adhesive cable tie mount 0.75″x 0.75″ – Black – Pack of 100
This cable tie adhesive mount is used to direct and fasten cable-tied bundles to flat surfaces. Cable ties can be inserted from a variety of directions, allowing for quick installation. The cradle design at the top of the mount allows for the bundle to fit snug. The mounts peel and stick self adhesive can attach to most flat surfaces.
Adhesive cable tie mount 0.75″x 0.75″ – Natural – Pack of 100
This cable tie adhesive mount is used to direct and fasten cable-tied bundles to flat surfaces. Cable ties can be inserted from a variety of directions, allowing for quick installation. The cradle design at the top of the mount allows for the bundle to fit snug. The mounts peel and stick self adhesive can attach to most flat surfaces.
Adhesive cable tie mount 1.5″x 1.5″ – Black – Pack of 100
This cable tie adhesive mount is used to direct and fasten cable-tied bundles to flat surfaces. Cable ties can be inserted from a variety of directions, allowing for quick installation. The cradle design at the top of the mount allows for the bundle to fit snug. The mounts peel and stick self adhesive can attach to most flat surfaces
